Všechno
Klíčová slova výrobku
Zadejte prosím účet e-mailové adresy
Creality 3D CR - 10 3D tiskárna
Share to:

Creality 3D CR - 10 3D tiskárna

- Modrý Zástrčka EU
212296802

Desktop DIY Machine
4.74 345 Zákaznické recenze | Please refer to English description
369.99 $457.38 19% SLEVA
Ušetřete navíc za použití aplikace

Naskenujte QR kód pro koupi:

  • 1. Stáhněte si naši aplikaci ZDARMA na Google Play nebo App Store.
  • 2. Spusťte naši aplikaci a naskenujte QR kód pro přímou koupi.

Dodržujte následující kroky:

  • 1. Přihlaste se na Gearbest.com
  • 2. Přidejte výrobek(y) přidělený do vašeho nákupního košíku.
  • 3. Otevřete naši aplikaci a přejděte do svého nákupního košíku.
  • 4. Zaplaťte za svou objednávku, abyste získali okamžitou slevu!
  • DOPRAVA ZDARMA
    COD Toto zboží si můžete zakoupit na dobírku. Doporučení: Do své objednávky nepřidávejte zboží bez možnosti dobírky, jinak si nebudete moci zvolit dobírku jako typ platby.
    Přeprava mezi: Dec 16 - Dec 18, Odhadovaná doba přepravy: pracovní dny Zpracování objednávky může trvat několik dní. Po expedici ze skladu závisí doba přepravy (resp. dodávky) na zvoleném způsobu dopravy.
  • +
  • bezúročná Můžete se těšit maximálně z 0 bezúročných splátek a nesmíte využít tuto nabídku, když zadáváte objednávky na další výrobky
Daňové údaje Cenová ochrana Zřeknutí se odpovědnosti za ceny Repair Warranty Report Item
likvidace zásob

Doporučené výrobky pro vás

Zákazníci, kteří si koupili tuto položku si také koupili

Prohlášení:
● Před montáží nebo obsluhou 3D tiskárny si prosím pozorně přečtěte a dodržujte návod k obsluze.
● Úprava a přizpůsobení 3D tiskárny je přísně zakázáno. Nepřebíráme žádnou odpovědnost za jakékoli problémy vyplývající z úprav.
● Pro oblast používejte vždy správné střídavé napětí.
● 3D tiskárnu neumísťujte do blízkosti hořlavých / hořlavých materiálů nebo zdrojů tepla.
● 3D tiskárnu používejte pouze v dobře větraných prostorách. Udržujte bezpečnou vzdálenost od tiskárny.


CR - 10 3D velkoformátové stolní DIY tiskárny LCD displej s funkcí SD Card Off-line tisku

Popis:
3D stolní tiskárna CR - 10 je 3D tiskárna s importovaným speciálním hliníkovým rámem. Je vybaven mimořádně velkým objemem 300 x 300 x 400 mm, standardním průměrem trysky 0,4 mm (může být nahrazen 0,3 / 0,2 mm). Tiskárna CR-10 3D je pro udržení dojmu z garáže a ručně vyráběného kouzla také stavebnicí, která vám poskytne nezapomenutelný zážitek z učení krok za krokem pro 3D tiskárnu!

Hlavní rysy:
● S LCD obrazovkou a klávesnicí pro snadné použití offline
● Podporuje off-line tisk na SD kartu, lze také přímo tisknout pomocí USB adaptéru
● Objem 300 x 300 x 400 mm, přesně pro vás
● Podporuje více 3D tiskových vláken: ABS / PLA / TPU a tak dále
● Další zjednodušená konstrukce umožňuje rychlou montáž a snadné nastavení, což vám ušetří čas i energii
● Zvýšená stabilita a spolehlivost: hliníkový plech zajišťuje stabilnější tisk
● Montáž je jednoduchá a vhodná pro zákazníky DIY
● Jedná se o neupravenou soupravu DIY, která vám poskytne nezapomenutelný zážitek z učení krok za krokem pro 3D tiskárnu od nuly. Pokud máte vášeň pro kreativitu, nemůžete si dovolit nechat ujít tento produkt
● Teplota trysky: pod 250 Deg.C v normálním stavu, max. 50 ° C. 270 Deg.C
● Funkce detekce přerušení vlákna a pokračování tisku při obnovení stavu vypínání (pouze u aktualizované verze)
● Poznámka: můžete klepnout tadyvybrat jinou barvu

Stažení ovladače:klikněte zde

Specifikace

Všeobecné

Značka: Kreativita
Modelka: CR - 10
Typ: DIY
Průměr trysky: 0,4 mm
Tisk offline s paměťovou kartou: SD karta
LCD obrazovka: Ano
Rychlost tisku: 150 mm / s
Průměr materiálu: 1,75 mm
Formát souboru: G-kód,JPG,OBJ,STL
Hostitelský počítačový software: Cura
Typ balení: nesmontované balení

Rozměry a hmotnost

Hmotnost výrobku: 9.0000 kg
Hmotnost balení: 13.8000 kg
Velikost produktu (D x Š x V): 65,00 x 54,00 x 29,00 cm / 25,59 x 21,26 x 11,42 palce
Velikost balení (D x Š x H): 66,00 x 55,00 x 30,00 cm / 25,98 x 21,65 x 11,81 palce

Obsah balení

Obsah balení: 1 x CR - 10 3D Desktop DIY Printer Kit
Creality 3D CR - 10 3D tiskárna- Modrý Zástrčka EU
Creality 3D CR - 10 3D tiskárna- Modrý Zástrčka EU
Creality 3D CR - 10 3D tiskárna- Modrý Zástrčka EU
Creality 3D CR - 10 3D tiskárna- Modrý Zástrčka EU
Creality 3D CR - 10 3D tiskárna- Modrý Zástrčka EU
Creality 3D CR - 10 3D tiskárna- Modrý Zástrčka EU
Creality 3D CR - 10 3D tiskárna- Modrý Zástrčka EU
Creality 3D CR - 10 3D tiskárna- Modrý Zástrčka EU

Zákaznické recenze

4.74 out of 5
  • 274
  • 63
  • 2
  • 1
  • 5
See all 345 reviews Napište recenzi
  • Chris Durkin
    Ano (5) Barva: Blue Velikost: US Plug
    cdurkinz
    -Very good quality prints
    -Prints in most filaments
    -Everything is very high quality, heavy, metal, very skookam.
    -Chooches like the best of them!
    -Super quick and easy to assemble.
    -Some extra parts even
    -I've only just started but this seems to be one of the easier printers to upgrade quite a bit
    -Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.

    Some incorrect things that GearBest answered when people have asked in the questions section, that I would like to clear up, I just hope those same people see this review.

    -It DOES come with a glass bed top ontop of the aluminum heated bed base.
    -It DOES come with a little PLA filament. It's not a ton but it's quite a bit to get you started, I've printed 4 or 5 things so far and I haven't even put a dent in it.
    -I believe the extruder in this is an MK8

    Finally on to shipping. I'm somewhat happy to say that this is the fastest I've ever received something from China. Usually things take 2-3 weeks or more but this arrived in 10 days from China to Central US (Northern IL). The one weird thing and I'm guessing something went wrong was that when I ordered it I chose expedited shipping, and DHL EXT. It was NOT clear what DHL EXT is or what half of the shipping options mean, but I can say that my package started in China using China Post and was delivered to my door using USPS, the entire time I had a USPS tracking number to track it.

    Now when I ordered and chose DHL EXT there was NO added shipping cost even though it said expedited, which I found interesting because I'm fairly certain expedited shipping from China would cost a few bucks. So I figure maybe this "DHL EXT" isn't for shipping to the US and so they just sent it through USPS. But I can't say for sure.
    Suggestion
    -Not really a con but either it is tested before they ship it or I got one that someone returned and they fixed it or something.
    -Sticker on fan peeling off
    -A coupler's set-screws on the Y-axis stepper motor weren't affixed correctly, easy fix though so again not really a con. Plus I've read that some people have has those couplers snap in shipping so I figured this may have been done on purpose.

    The issue I had was when I went to tighten the set-screws they went all the way through and fell into the middle of the coupler. No big deal I had to loosen all the set screws and move things around to get them out and realized I had to move the coupler up a little bit for it to connect the Y-axis threaded pole and the stepper motor. Just an FYI

    Oct 04,2017

  • Daniele
    Ano (2) Barva: Blue Velikost: EU Plug
    Architetto
    La stampante CR-10 è una buona stampante che ha un ottimo rapporto prezzo-prestazione. E' facile da montare anche dai meno esperti; di fatto c'è da unire i due pezzi principali, stringere le viti e collegare i fili x, y, z nella giusta posizione e poi non resta che partire per la prima stampa di prova. Come “tradizione” NON STAMPATE il file g-code del Gatto... è corrotto e dopo due ore di stampa va fuori centro ed è tutto da buttare! Scaricate da internet uno dei tanti files di prova e provate con quelli; a me ha funzionato molto bene il Robot di Ultimaker.
    Per stampare in PLA non è necessario scaldare il piatto, occorre solo il nastro per dare aderenza. Occorre fare una buona calibrazione, che con un piatto di così grandi dimensioni non è semplicissima anche se, una volta fatta, viene mantenuta a lungo.
    Il problema maggiore nella calibrazione del piatto è che se vanno bene gli angoli al centro la testina di stampa o è troppo vicina e raschia la superficie o è troppo lontana e il layer non aderisce bene... Ciò è probabilmente dovuto al fatto che il piano in vetro non è perfettamente piano ma tende ad alzarsi o abbassarsi al centro. Consiglio quindi, dato che le stampe non saranno sempre alla massima dimensione, di calibrare il piatto sulla parte centrale più utilizzata per stampe con la base fino a 18x18 cm, ed utilizzare tutti i 40 cm di altezza.

    Consiglio questa stampante, soprattutto se è la vostra prima stampante 3D dove poter sperimentare ed imparare i trucchi per una buona stampa.
    Suggestion
    E' poco curata la documentazione fornita. La scheda fornita dovrebbe avere un maggior numero di files STL di esempio ed alcuni GCODE perfetti con le indicazioni dei parametri di slicing in modo da fare subito delle prove e verifiche. Sarebbe necessario anche avere da subito CURA nella versione più aggiornata, senza dover andare a scaricarla da internet.

    Dec 05,2017

  • Fredrik Stahre
    Ano (5) Barva: Blue Velikost: EU Plug
    Software Engineer
    The printer works well and gives good prints. I'm new to 3D printing so I can't really compare to anything else except youtube clips from other printers. One thing I have notices is that the cat print (even though it didn't print the head) included gets printed in super awesome quality and prints I've gotten of Thingiverse and sliced with Cura does not reach that quality, I guess it has to do with settings in Cura and maybe the details of the 3D files. The quality is very nice anyway though, so no real complaint, just an observation. It takes some skills to do the right settings when slicing.

    My machine was not actually working ok when I first started it up. The temperature measurements were resetting randomly and resulted in Low Temp errors. I found that the problem is because the cable that goes to the to the nozzle, fans etc is glitchy, when I move the cable it looses connection. I've temporarily solved it by disassembling the connector on to the main unit and bent the cables a bit but it's not a long term solution. I will ask GearBest if the can send a new cable.

    Overall, for the price, this printer is very good so far and it was easy to assemble. If it hadn't been for that glitch in the cable it would have been super easy. Still, not recommended if you are looking for a Plug and Play experience, you need to watch some you tube vids, read some instructions and be ready to experiment a bit before you get nice prints.
    Suggestion
    Bed levelling is a bit fiddly and I think it doesn't get exactly levelled. Mine is level in the corners but it's sagging down 0.1-0.2mm in the middle. I've solved it by levelling without tape in the corners and then printing on one layer of tape to get the middle part up 0.1 mm. I'm not sure how this will work for really big prints that goes all the way out to the edges though, the nozzle might come to close to the glass. I've yet to try any of the more advanced solutions with wedges under the bed. For now it works just fine with a layer of tape.

    Could use some more instructions on how to get started with setup and printing. How to get prints to stick to the bed and so on.

    Aug 04,2017

  • T (engineering student)
    Ano (1) Barva: Blue Velikost: US Plug Upgraded Version
    Just received 9/15/18
    Took about about 10 days to get from China to Northern California. Got the printer set-up and printing in about an hour. The settings on the cat file that comes on the SD aren't great, had to lower nozzle temp to 192 and raise bed temp to 60. Still working on first complete print (PSU box legs) and notice a lot of stringing, which is likely due to settings (retraction probably).

    Okay, quality control issues.1. Y-axis belt tensioner bracket was bent causing belt to ride on one side of the pulleys and twist. 2. Bracket holding y-axis stepper motor is bent and causing same issue as the other end. These are very simple things to fix, which will happen after the current print is done. 3. They did not debur and clean up the metal from the holes being drilled in the frame. Easy thing to clean up, but it probably shouldn't be there. 4. Glass bed is warped. Everyone already knows about this, and I'm sure they are aware. Hope they fix this sooner than later. 5. Hot end heat sink not screwed in on one side and is sitting cockeyed. Noticed it during current print, I think all it needs to be tightened down. I hope they didn't mess something up and then leave it like that. I'll update later.

    Packaging was A+ great. Box was not beat up in shipping. Instruction manual is good enough.

    For the price (compared to amazon/others) it seems like this is a great deal.

    Sep 16,2018

  • Creality CR-10S Unboxing and Setup
    Ano (2) Barva: Blue Velikost: EU Plug Upgraded Version
    Creality CR-10S Unboxing and Setup
    The Creality3D CR - 10S 3D Desktop DIY Printer was a very simple and easy to build 3D printer that has very good print results.
    Highly recommend if you are in the market for a 3D printer that is low budget with good quality print output.
    Building the printer was very easy from start to finish. Very little skill was needed as a lot of the build was already done.
    Unbelievable 3D printer. Well worth the money
    Very good quality prints
    Prints in most filaments
    Everything is very high quality
    Super quick and easy to assemble.
    Some extra parts even
    I've only just started but this seems to be one of the easier printers to upgrade quite a bit
    Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.
    Check out my unboxing and build video
    https://www.youtube.com/watch?v=jDU3mpXYGyc&t=33s
    Suggestion
    A few loose bolts found on the assembled parts so check when you are building yours. These may have been left loose for transport.
    At this time there are no real cons as every thing was easily assembled and worked perfect from the start

    Jun 25,2018

Otázky a odpovědi zákazníků

  • Vše
  • Informace o výrobku
  • Stav skladových zásob
  • Platba
  • O dopravě
  • Jiné

Buďte PRVNÍ, kdo se zeptá. Chcete GB body? Stačí napsat recenzi!

Buďte PRVNÍ, kdo se zeptá. Chcete GB body? Stačí napsat recenzi!

Buďte PRVNÍ, kdo se zeptá. Chcete GB body? Stačí napsat recenzi!

Buďte PRVNÍ, kdo se zeptá. Chcete GB body? Stačí napsat recenzi!

Buďte PRVNÍ, kdo se zeptá. Chcete GB body? Stačí napsat recenzi!

Buďte PRVNÍ, kdo se zeptá. Chcete GB body? Stačí napsat recenzi!

0 Otázky a odpovědi Zobrazit vše >

Sponzorované výrobky týkající se této položky

Vaše nedávno prohlížené položky

Viz personalizovaná doporučení

Nový zákazník? Začněte zde